Fischer-Tropsch process Totally Explained

Everything about The Fischer-tropsch Process totally explained

The Fischer-Tropsch process (or Fischer-Tropsch Synthesis) is a catalyzed chemical reaction in which synthesis gas, a mixture of carbon monoxide and hydrogen, is converted into liquid hydrocarbons of various forms. The most common catalysts are based on iron and cobalt, although nickel and ruthenium have also been used. The principal purpose of this process is to produce a synthetic petroleum substitute, typically from coal, natural gas or biomass, for use as synthetic lubrication oil or as synthetic fuel. This synthetic fuel runs trucks, cars,and some aircraft engines.(Refer to Sasol) The use of diesel is increasing in recent years Combination of biomass gasification (BG) and Fischer-Tropsch (FT) synthesis is considered by some a very promising route to produce renewable transportation fuels (biofuels).

Process Chemistry

The Fischer-Tropsch process involves a variety of competing chemical reactions, which lead to a series of desirable products and undesirable byproducts. The most important reactions are those resulting in the formation of alkanes. These can be described by chemical equations of the form:
ť (2n+1)H₂ + nCO → C_nH_(2n+2) + nH₂O

where 'n' is a positive integer. The simplest of these (n=1), results in formation of methane, which is generally considered an unwanted byproduct (particularly when methane is the primary feedstock used to produce the synthesis gas). Process conditions and catalyst composition are usually chosen, so as to favor higher order reactions (n>1) and thus minimize methane formation. Most of the alkanes produced tend to be straight-chained, although some branched alkanes are also formed. In addition to alkane formation, competing reactions result in the formation of alkenes, as well as alcohols and other oxygenated hydrocarbons. Usually, only relatively small quantities of these non-alkane products are formed, although catalysts favoring some of these products have been developed.
Another important reaction is the water-gas-shift reaction:
ť H₂O + CO → H₂ + CO₂

Although this reaction results in formation of unwanted CO₂, it can be used to shift the H₂:CO ratio of the incoming Synthesis gas. This is especially important for synthesis gas derived from coal, which tends to have a ratio of ~0.7 compared to the ideal ratio of ~2.

Process Conditions

Generally, the Fischer-Tropsch process is operated in the temperature range of 150-300°C. Higher temperatures lead to faster reactions and higher conversion rates, but also tend to favor methane production. As a result the temperature is usually maintained at the low to middle part of the range. Increasing the pressure leads to higher conversion rates and also favors formation of long-chained alkanes both of which are desirable. Typical pressures are in the range of 1 to several 10's of atmosphere's. Chemically, even higher pressures would be favorable, but the benefits may not justify the additional costs of high-pressure equipment.
A variety of synthesis gas compositions can be used. For cobalt-based catalysts the optimal H₂:CO ratio is around 1.8-2.1. Iron-based catalysts promote the water-gas-shift reaction and thus can tolerate significantly lower ratios. This can be important for synthesis gas derived from coal or biomass, which tend to have relatively low H₂:CO ratios (<1).

Product Distribution

In general the product distribution of hydrocarbons formed during the Fischer-Tropsch process follows an Anderson-Schultz-Flory distribution, which can be expressed as:
ť W_n/n = (1-α)²α^n-1

Where W_n is the weight fraction of hydrocarbon molecules containing n carbon atoms. α is the chain growth probability or the probability that a molecule will continue reacting to form a longer chain. In general, α is largely determined by the catalyst and the specific process conditions.
Examination of the above equation reveals that methane will always be the largest single product, however by increasing α close to one, the total amount of methane formed can be minimized compared to the sum of all of the various long-chained products. Increasing α increases the formation of long-chained hydrocarbons. The very long-chained hydrocarbons are waxes, which are solid at room temperature. Therefore, for production of liquid transportation fuels it may be necessary to crack some of the Fischer-Tropsch products. In order to avoid this, some researchers have proposed using zeolites or other catalyst substrates with fixed sized pores that can restrict the formation of hydrocarbons longer than some characteristic size (usually n<10). This way they can drive the reaction so as to minimize methane formation without producing lots of long-chained hydrocarbons. So far, such efforts have had only limited success.

Fischer-Tropsch Catalysts

A variety of catalysts can be used for the Fischer-Tropsch process, but the most common are Cobalt, Iron, and Ruthenium. Nickel can also be used, but tends to favor methane formation. Cobalt seems to be the most active catalyst, although iron also performs well and can be more suitable for low-hydrogen-content synthesis gases such as those derived from coal due to its promotion of the water-gas-shift reaction. In addition to the active metal the catalysts typically contain a number of promoters, including potassium and copper, as well as high-surface-area binders/supports such as silica, alumina, or zeolites.
Unlike the other Group VIII metals (Co, Ni, Ru) which remain in the metallic state during synthesis. Iron catalysts tend to form a number of chemical phases, including various iron oxides and iron carbides during the reaction. Control of these phase transformations can be important in maintaining catylitic activity and preventing breakdown of the catalyst particles.

Synthesis Gas Production

The initial reactants for the Fischer-Tropsch process (for example CO and H₂) can be produced by other reactions such as the partial combustion of a hydrocarbon:
ť C_nH_(2n+2) + ½ nO₂ → (n+1)H₂ + nCO

for example (when n=1), methane (in the case of gas to liquids applications):
ť 2CH₄ + O₂ → 4H₂ + 2CO

or by the gasification of coal or biomass:
ť C + H₂O → H₂ + CO

The energy needed for this endothermic reaction of coal or biomass and steam is usually provided by (exothermic) combustion with air or oxygen. This leads to the following reaction:
ť 2C + O₂ → 2CO

The mixture of carbon monoxide and hydrogen is called synthesis gas or syngas. The resulting hydrocarbon products are refined to produce the desired synthetic fuel.
The carbon dioxide and carbon monoxide is generated by partial oxidation of coal and wood-based fuels. The utility of the process is primarily in its role in producing fluid hydrocarbons from a solid feedstock, such as coal or solid carbon-containing wastes of various types. Non-oxidative pyrolysis of the solid material produces syngas which can be used directly as a fuel without being taken through Fischer-Tropsch transformations. If liquid petroleum-like fuel, lubricant, or wax is required, the Fischer-Tropsch process can be applied.

History

Since the invention of the original process by the German researchers Franz Fischer and Hans Tropsch, working at the Kaiser Wilhelm Institute in the 1920s, many refinements and adjustments have been made, and the term "Fischer-Tropsch" now applies to a wide variety of similar processes (Fischer-Tropsch synthesis or Fischer-Tropsch chemistry). Fischer and Tropsch filed a number of patents, for example US patent no. 1,746,464, applied 1926, published 1930 .
   The process was invented in petroleum-poor but coal-rich Germany in the 1920s, to produce liquid fuels. It was used by Germany and Japan during World War II to produce ersatz fuels. Germany's annual synthetic fuel production reached more than from 25 plants ~ 6.5 million tons in 1944.
   After the war, captured German scientists recruited in Operation Paperclip continued to work on synthetic fuels in the United States in a United States Bureau of Mines program initiated by the Synthetic Liquid Fuels Act.
   In Britain, Alfred August Aicher obtained several patents for improvements to the process in the 1930s and 1940s, for example British patent no. 573,982, applied 1941, published 1945 . Aicher's company was named Synthetic Oils Ltd but this isn't thought to have any connection with the Canadian company of the same name.

Utilization

Currently, only a handful of companies have commercialised their FT technology.

Shell in Bintulu, Malaysia, uses natural gas as a feedstock, and produces primarily low-sulfur diesel fuels and food-grade wax.
Sasol in South Africa uses coal and natural gas as a feedstock, and produces a variety of synthetic petroleum products. Sasol produces most of the country's diesel fuel.

The process was used in South Africa to meet its energy needs during its isolation under Apartheid. This process has received renewed attention in the quest to produce low-sulfur diesel fuel in order to minimize the environmental impact from the use of diesel engines.
   A small US-based company, Rentech, is currently focusing on converting nitrogen-fertiliser plants from using a natural gas feedstock to using coal or coke, and producing liquid hydrocarbons as a by-product.
   Also Choren Industries has built an FT plant in Germany.
   The FT process is an established technology and already applied on a large scale in some industrial sectors, although its popularity is hampered by high capital costs, high operation and maintenance costs, the uncertain and volatile price of crude oil, and environmental concerns. In particular, the use of natural gas as a feedstock only becomes practical when using "stranded gas", for example sources of natural gas far from major cities which are impractical to exploit with conventional gas pipelines and LNG technology; otherwise, the direct sale of natural gas to consumers would become much more profitable. There are several companies developing the process to enable practical exploitation of so-called stranded gas reserves.
   This technology has been proposed as a way to create transportation fuel from coal if conventional oil were to become more expensive. In Sept. 2005, Pennsylvania governor Edward Rendell announced a venture with Waste Management and Processors Inc. - using technology licensed from Shell and Sasol - to build an FT plant that will convert so-called waste coal (leftovers from the mining process) into low-sulfur diesel fuel at a site outside of Mahanoy City, northwest of Philadelphia. The state of Pennsylvania has committed to buy a significant percentage of the plant's output and, together with the U.S. Dept. of Energy, has offered over $140 million in tax incentives. Other coal-producing states are exploring similar plans. Governor Brian Schweitzer of Montana has proposed developing a plant that would use the FT process to turn his state's coal reserves into fuel in order to help alleviate the United States' dependence on foreign oil.
   In Oct. 2006, Finnish paper and pulp manufacturer UPM announced its plans to produce biodiesel by Fischer-Tropsch process alongside the manufacturing processes at its European paper and pulp plants, using waste biomass resulted by paper and pulp manufacturing processes as source material.
   In August 2007, Louisiana State University announced they'd received funding from the US Department of Energy and Conoco Phillips for development of new nanotechnologies for catalysis of coal syngas to ethanol conversion.

U.S. Air Force certification

Syntroleum, a publicly traded US company (Nasdaq: SYNM) has produced over 400,000 gallons of diesel and jet fuel from the Fischer-Tropsch process using natural gas and not coal at its demonstration plant near Tulsa, Oklahoma. Syntroleum is working to commercialize its licensed Fischer-Tropsch technology via coal-to-liquid plants in the US, China, and Germany, as well as gas-to-liquid plants internationally. Using natural gas as a feedstock, the ultra-clean, low sulfur fuel has been tested extensively by the US Department of Energy, the Department of Transportation, and most recently, Syntroleum has been working with the U. S. Air Force to develop a synthetic jet fuel blend that will help the Air Force to reduce its dependence on imported petroleum. The Air Force, which is the U.S. military's largest user of fuel, began exploring alternative fuel sources in 1999. On December 15, 2006, a B-52 took off from Edwards AFB, California for the first time powered solely by a 50-50 blend of JP-8 and Syntroleum's FT fuel. The seven-hour flight test was considered a success. The goal of the flight test program is to qualify the fuel blend for fleet use on the service's B-52s, and then flight test and qualification on other aircraft.
This program is part of the Department of Defense Assured Fuel Initiative, an effort to develop secure domestic sources for the military energy needs. The Pentagon hopes to reduce its use of crude oil from foreign producers and obtain about half of its aviation fuel from alternative sources by 2016. With the B-52 now approved to use the FT blend, the USAF will use the test protocols developed during the program to certify the C-17 Globemaster III and then the B-1B to use the fuel. The Air Force intends to test and certify every airframe in its inventory to use the fuel by 2011.

CO₂ Reuse

There are investigations underway to reduce CO₂ emissions by using solar power to convert waste CO₂ into CO from where the FT process can then convert it to hydrocarbons.

Further Information

Get more info on 'Fischer-tropsch Process'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://fischer-tropsch_process.totallyexplained.com">Fischer-Tropsch process Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.